How to Start Windows 10 in Safe Mode While Booting: A Step-by-Step Guide

If you're experiencing issues with your Windows 10 operating system, starting it in safe mode can help you troubleshoot and fix any problems. In this article, we'll show you how to start Windows 10 in safe mode while booting, allowing you to diagnose and resolve issues effectively.

How to Start Windows 10 in Safe Mode During Booting

Safe Mode is a useful feature in Windows 10 that allows you to troubleshoot and fix issues by booting the operating system with only essential drivers and services. To start Windows 10 in Safe Mode during booting, follow these steps:

Step 1: Restart your computer.

Step 2: As the computer restarts, press and hold the Shift key.

Step 3: Keep holding the Shift key until the Advanced Startup Options menu appears.

Step 4: In the Advanced Startup Options menu, select Troubleshoot.

Step 5: Within the Troubleshoot menu, click on Advanced options.

Step 6: In the Advanced options menu, choose Startup Settings.

Step 7: Click on the Restart button.

Step 8: After the computer restarts, you will see a list of options. Press the 4 or F4 key to start Windows 10 in Safe Mode.

Once Windows 10 starts in Safe Mode, you can diagnose and fix any issues you may be experiencing. Remember to restart your computer normally when you're done troubleshooting to exit Safe Mode.

By following these steps, you can easily start Windows 10 in Safe Mode during booting without encountering any difficulties.

[Solved] Windows Failed to Start A Recent Hardware or Software Change Might Be The Cause

How can I make Windows 10 boot in Safe Mode?

To make Windows 10 boot in Safe Mode, follow these steps:

1. Press the "Windows" key + "R" simultaneously to open the "Run" dialog box.
2. Type "msconfig" and press Enter. This will open the "System Configuration" window.
3. In the "System Configuration" window, click on the "Boot" tab.
4. Under the "Boot options" section, check the box next to "Safe boot" and choose the type of Safe Mode you want to boot into (such as "Minimal" or "Networking").
5. Click "Apply" and then "OK" to save the changes.
6. A dialog box will appear asking if you want to restart your computer. Click "Restart" to boot into Safe Mode.

Note: When you are finished with Safe Mode, remember to repeat the steps above and uncheck the "Safe boot" option to return to normal booting.

I hope this helps!

How can I enter Safe Mode during startup?

To enter Safe Mode during startup, follow these steps:

1. Restart your computer.
2. As soon as your computer starts up, continuously press the F8 key before the Windows logo appears.
3. The Advanced Boot Options menu will appear. Use the arrow keys to highlight "Safe Mode" or "Safe Mode with Networking" if you need internet access in Safe Mode.
4. Press Enter to boot into Safe Mode.

Note: If you don't see the Advanced Boot Options menu, try restarting your computer and repeating the process. If it still doesn't work, it could be because your computer manufacturer has disabled this feature or you have a different key combination for accessing the boot options. In such cases, consult your computer's documentation or the manufacturer's website for specific instructions on how to enter Safe Mode.

Is F8 Safe Mode supported in Windows 10?

Yes, F8 Safe Mode is still supported in Windows 10, but it might require a few extra steps to access it compared to previous versions of Windows.

Here's how you can enable and access Safe Mode in Windows 10:

1. Press the Windows key + R to open the Run dialog box.
2. Type in "msconfig" (without quotes) and press Enter.
3. In the System Configuration window, navigate to the Boot tab.
4. Under the Boot options section, check the box next to "Safe boot". You can choose between "Minimal" and "Network" options depending on your needs.
5. Click OK and then Apply.
6. A prompt will appear asking if you want to restart your computer immediately or later. Choose Restart to enter Safe Mode on the next boot.

Please note that accessing Safe Mode using the F8 key during startup might not work on all systems due to fast boot options or hardware configurations. If you encounter any issues, the above method should still allow you to enter Safe Mode in Windows 10.

FAQ

How to start Windows 10 in safe mode while booting?

To start Windows 10 in safe mode while booting, follow these steps:

1. **Press and hold** the Shift key on your keyboard.
2. **Click** on the Start menu icon or press the Windows key while holding Shift.
3. **Click** on the Power button, then **click** on Restart while still holding the Shift key.
4. Your computer will restart and display the "Choose an option" screen.
5. **Click** on Troubleshoot.
6. **Click** on Advanced options.
7. **Click** on Startup Settings.
8. **Click** on Restart.
9. After your computer restarts again, a list of startup settings will be displayed. **Press** the F4 key or **select** the option for Safe Mode.
10. Your computer will now start in safe mode.

Remember, safe mode is a diagnostic mode that only loads essential Windows services and drivers, so some functionalities may be limited. It can be helpful for troubleshooting issues or removing problematic software.

Note: These steps may vary slightly depending on your specific computer model and version of Windows 10.

What are the steps to enter safe mode on Windows 10 during startup?

To enter safe mode on Windows 10 during startup, follow these steps:

1. Start or restart your computer.
2. As soon as your computer starts booting up, press and hold the **Shift** key.
3. While holding the Shift key, repeatedly press the **F8** key. This will bring up the recovery menu.
4. From the recovery menu, select **See advanced repair options**.
5. Then, choose **Troubleshoot**.
6. Next, select **Advanced options**.
7. In the advanced options menu, select **Startup Settings**.
8. Finally, click on the **Restart** button.
9. After your computer restarts, you will see a list of startup settings. Press the **4** or **F4** key to enable safe mode.

Your computer will now start in safe mode, allowing you to troubleshoot any issues or remove problematic software.

Can you provide a detailed guide on how to boot Windows 10 into safe mode?

How to Boot Windows 10 into Safe Mode

Safe Mode is a troubleshooting option in Windows 10 that starts your computer with limited functionality, allowing you to diagnose and fix problems. Here's a step-by-step guide on how to boot Windows 10 into Safe Mode:

1. Click on the "Start" menu button located at the bottom left corner of your screen.

2. Click on the "Settings" icon (shaped like a gear) to open the Settings app.

3. In the Settings app, click on "Update & Security".

4. From the left sidebar, select "Recovery".

5. Under the "Advanced startup" section, click on the "Restart now" button. This will restart your computer and bring up the recovery options.

6. When your computer restarts, you'll see a blue screen with several options. Click on "Troubleshoot".

7. In the Troubleshoot menu, click on "Advanced options".

8. Within the Advanced options, click on "Startup Settings".

9. You'll see a screen with various startup settings. Press the "Restart" button located at the bottom right corner.

10. After restarting, you'll see a list of numbered options. Press the corresponding number key for "Enable Safe Mode". Normally, it's either 4 or 5, but this can vary depending on your system configuration.

11. Your computer will now boot into Safe Mode. You'll notice that the desktop looks different and certain features may be disabled.

12. To exit Safe Mode, simply restart your computer as you normally would. It will boot back into the regular mode.

That's it! You have successfully booted Windows 10 into Safe Mode. Remember to use Safe Mode only when troubleshooting or fixing issues, as it limits the functionality of your computer.

In conclusion, starting Windows 10 in safe mode while booting is an essential troubleshooting technique that can help resolve various system issues. By following the simple steps outlined in this article, users can easily access safe mode to diagnose and troubleshoot problems without interference from non-essential software or drivers. Whether you are encountering a persistent blue screen error or experiencing performance issues, safe mode offers a secure environment to identify and resolve these issues effectively. Remember, mastering this skill can empower you to take control of your Windows 10 device and ensure its optimal performance. So, next time you encounter any system-related problem, don't hesitate to utilize the safe mode feature to troubleshoot and address the issue promptly.